How to Remove CPU
Removing the Processor
After removing the heat sink, follow these instructions to complete the processor removal process:
Step 1. Disconnect the active heat sink (if included) from its power source and lift the assembly away.
Step 2. Push the lever on the ZIF socket slightly to the outside of the socket to release it.
Step 3. Lift the end of the lever until it is vertical. This releases the clamping mechanism on the processor's pins.
Step 4. Grasp the processor on the opposite sides, making sure not to touch the pins, and remove the socket. Put it into antistatic packaging.
The process of removing an LGA 775 processor is a bit different:
Step 1. Disconnect the active heat sink (if included) from its power source and lift the assembly away.
Step 2. Lift the locking lever to release the load plate, which holds the processor in place.
Step 3. Carefully lift the processor away and place into antistatic packaging.
Be careful when removing the processor and when unlocking any sockets. These components are delicate. Think of yourself as a watchmaker when dealing with these parts!!!
To remove a slot-type CPU follow these steps:
Step 1. Push down on the retainers at each end of the CPU to release the CPU from the retention mechanism.
Step 2. Disconnect the power lead to the CPU fan (if present).
Step 3. Remove the CPU and fan/heat sink from the retention mechanism. The CPU slides straight up from the slot.
Follow @EugeneComputerG